How to build a Gas Cage

Our gas cages are extremely easy to construct, and will take two people roughly 20 minutes to construct. We have listed the basic points below to demonstrate just how easy it is. If you require any further information, please contact us.

What are 'Nylok' nuts?

Nylok nuts, or Nylon Insert lock nuts, contain a ring of nylon to form a secure collar insert. This collar locks the nut onto the bolt, creating a tighter and more reliable grip than normal nuts.

Tools Required

  • Spanner
  • Protective Gloves
  • 2 People

Step 1

Place the rear panel against a wall, or supported by a second person. Ensure that the bolt holes are facing forwards, with the box frame facing inward. The mesh should be on the outside.

Step 2

Place the first side panel against the rear panel, aligning the bolt holes. Fix with the bolts and nuts provided. Repeat to the opposite side.

Step 3

Offer the front panel (the door) to the side panels. Again, align the bolt holes and fix with the bolts and nylok nuts provided. Ensure that the bolts are tight!

Step 4

Place the roof panel on top, align the bolt holes and fix with the bolts and nylok nuts provided. Check that all bolts are secure.

Cage pictured: GC20. Galvanised finish available. Standard Colours :
  • - Black
  • - Red
  • - Blue
  • - Grey
Yellow cage used for demonstration purposes only. Other colours available